Talk about anything related to Tajima DG15 by Pulse here
Distribution stitch
|
RicamificioOrma Posts: 3
2/19/2019
|
Why the distribution of stitch is not uniform and regular? Especially when you increase the density for 3d puff." "" "
|
|
|
0
link
|
|
Kazu Posts: 19
2/20/2019
|
Actually, embroidery machines can move the frame (hoop) in minimum of X:0.1mm/Y:0.1mm. (Minimum stitch length)
So when stitches are generated based on digitized outline/path, stitches are distributed to each 0.1/0.1mm position, never smaller such as 0.05mm.
See the attached.
Grid size is set to X:0.1mm/Y:0.1mm for easier understanding.
Each stitch point is located at intersections of grid, never within grids.
Located at closest intersection point to digitized path line.
If stitches are uniformly distributed along the path, it means stiches are located at points less than Minimum stitch length, such as X0.05/Y0.02.
The machine cannot do that.
Hope my explanation can let you understand.
edited by Kazu on 2/20/2019
|
|
|
+1
link
|