|
fenix1330 Posts: 44
11/20/2018
|
1. Do not draw PXF thumbnails in explorer.
2. Cant switch to Classic shortcuts interface. For example "H" key do not work for closing segments.
edited by PulseMicro on 3/4/2019
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
Tajima Software Administrator Posts: 461
11/21/2018
|
Thank you for your feedback fenix1330. We have passed it onto the development team for review. If you can attach any screenshots or provide more information about the steps you took, that would help!
|
|
|
0
link
|
|
fenix1330 Posts: 44
11/28/2018
|
1. Do not draw PXF thumbnails in explorer
There was 15-th version installed and all worked fine. Then we have install 16-th version but did not remove 15th.
Since that moment thumbnails do not draws.
We have remove 16-th then but it is not helps.
2. Cant switch to Classic shortcuts interface. For example "H" key do not work for closing segments.
We can say more simple about this problem: How to use "H" hotkey for closing segments as it was realized in previous versions? In earlier versions it was possible to restore this key by switching to "Classic shortcuts" (See screen). But now it seems like this switcher do not work in 16-th
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
Tajima Software Administrator Posts: 461
11/28/2018
|
Thanks fenix1330, we are looking into the issues you have reported and your feedback has been helpful.
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/5/2018
|
Also it is impossible to "Show Active Group" stitches. There is no such menue "Outline Window - View - Stithes - Show Active Group". Also Shift+A do not work as it was in previous versions. Scr. http://prntscr.com/lr22k7
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/6/2018
|
Also basic mouse pointer "cross" became too fat. It almost 4x thicker than guidelines. It is very uncomfortable to precise punching.
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
Tajima Software Administrator Posts: 461
12/6/2018
|
Thank you for your feedback fenix1330
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/7/2018
|
Also it is impossible to "Show Active Group" stitches. There is no such menue "Outline Window - View - Stithes - Show Active Group". Also Shift+A do not work as it was in previous versions. Scr. http://prntscr.com/lr22k7
I have fixed it by turning off "Ribbon interface" and assigning shurtcut to this command.
But "Н" key still not work for closing segments.
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
TheFucciGroup Posts: 1
12/8/2018
|
Can I finally use Pulse DG16 on MacOS?
|
|
|
0
link
|
Guest
12/13/2018
|
Shortcuts mechanism works very strange.
It's like "overlay" under system. For example if Google Chrome opened and active and also DGML is opened but minimized then "Shift+T" (reopen tab) do not work in Chrome but calls DGML recipe dialog.
Also text field still too small (screenshot http://prntscr.com/lufxdm )
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/13/2018
|
Please see a screen http://prntscr.com/lugu7v
It would be great to higlight active tab with other color
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/14/2018
|
Please look at performance. PC: Prntium i5, 8GB RAM, SSD
https://youtu.be/AEfjzeuy5tI
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/14/2018
|
Some commands unable to acces from ribbon interface. Please look at some screenshots:
https://prntscr.com/luu4o6
https://prntscr.com/luu3d9
https://prntscr.com/luu1ub
https://prntscr.com/luu1bt
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/14/2018
|
My saved workspaces do not shows http://prntscr.com/luvayv
Just some reset becomes
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/14/2018
|
Embroidery fonts preview size is ok http://prntscr.com/luvcb1
But TrueType Preview is toooo small http://prntscr.com/luvcvc
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/14/2018
|
fenix1330 wrote:
It would be great to highlight active tab with other color
Also it would be great if properties tab will stay active exactly as is while traveling between segments. For example I want to compare underlay properties between two segments. I select a first segment and activate underlay properties tab. Then a select second segment but properties tab reset to main (satin for example)
edited by fenix1330 on 12/18/2018
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
Guest
12/14/2018
|
So. New ribbon interface is really interest but unfinished at all.
Alsow it really reduce performanse. Try to turn off ribbon interfase, totally close all dockingwindows at right and make settings like this on screenshots:
http://prntscr.com/luwaah
http://prntscr.com/luwb3f
http://prntscr.com/luwbe6
http://prntscr.com/luwbob
Then restart and fill the difference in performance.
It almost as 12-th performance was. 12-th was really quick.
I will make a movie with compareing later.
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/14/2018
|
fenix1330 wrote:
Please look at performance. PC: Prntium i5, 8GB RAM, SSD
https://youtu.be/AEfjzeuy5tI
I think exactly this issue related with some graphic bug. I have found one more interesting thing:
1. First of all turn on "Direct 3d" and antialiasing "Yes" in preferences.
2. Then in classic interface close ALL doking windows at right side and restart programm.
3. Now try to draw some segment and you will se that it is not "smooth". Seems like antialiasing not works. https://prntscr.com/luxnp9
4. Now press Shift+T to open Sequence View docking window - and segment will immidiately redraw with antialiasing https://prntscr.com/luxny1
P.S. Guest guy some times above - it's me
edited by fenix1330 on 12/14/2018
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/18/2018
|
Insert do not work properly.
When turn on "insert mode" only outlines becomes gray but not stitches. It possible to fix by checking "Show gray after active" but this option really reduce performance.
--
Best regards, Daniil Chernenko
|
|
|
0
link
|
|
fenix1330 Posts: 44
12/18/2018
|
look at this glitch. It happens if Direct3d and antialiasing are turned on.
Then it impossible to aim segment in needed place.
https://youtu.be/d0CFcUljwc8
--
Best regards, Daniil Chernenko
|
|
|
0
link
|