Talk about anything related to Tajima DG16 by Pulse here
Error: Wrong functioncode for start and end codes
|
uniface Posts: 4
7/3/2024
|
Hello everyone,
Recently I changed my setup for the design computer. So I made a clean setup of the DG16. Before I used a USB connection to transfer the design data to my Tajima tmar-k1506c. Now I have also set up a LAN connection which works pretty well. But I get a 2BE error when I try to upload TBF design data via USB and a 3BE error when I try to upload the same file with a LAN connection. This error only occurs with TBF versions, not with DST versions. How can I solve this problem?
--
-the new face of workwear-
|
|
|
0
link
|
|
Tajima Software Administrator Posts: 488
7/3/2024
|
@uniface do the error codes occur with every single TBF file? If it is every single TBF file, are all files created in the same version of DG?
|
|
|
0
link
|
|
uniface Posts: 4
7/4/2024
|
I have some older TBF files which work fine. This only started after I set up a new PC and LAN connection. I am using DG16's latest update.
--
-the new face of workwear-
|
|
|
0
link
|
|
uniface Posts: 4
7/8/2024
|
Any ideas on how to fix this issue?
--
-the new face of workwear-
|
|
|
0
link
|
|
Tajima Software Administrator Posts: 488
7/8/2024
|
@uniface we are working to reproduce the issue on our end.
In the meantime please reach out to your local Tajima Software distributor for support:
https://www.tajimasoftware.com/contact
|
|
|
0
link
|
|
uniface Posts: 4
8/26/2024
|
I found the root cause of the issue but don't know how to fix it. When I pick "Slow" function as start command, the machine only recognize the .DST files. But when I pick any other function as start command, then machine recognize all the flie types including .tbf and .pxf
How my I solve this issue?
--
-the new face of workwear-
|
|
|
0
link
|
|
TajimaSoftwareAdmin Posts: 5
9/18/2024
|
We haven't been able to reproduce this issue. Please reach out to your local Tajima Software Distributor or to support@tajimasoftware.com and we can get in touch and create a support ticket.
|
|
|
0
link
|