https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx Tajima DG by Pulse Community - DG/ML General Discussion - CHENILLE CCO AND TBF FILES FOR MACHINE - Messages en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Tue, 26 Apr 2016 21:49:02 GMT Tue, 26 Apr 2016 21:49:02 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx That selection does not work in 14 (I have that choice but it does not designate the needle height on the machine) and I do not own 15. I tested out v15 at a show and this option did not work so unless they have rewritten the program it still won't work to set chain and moss height to send to the machine.

Just to see for yourself if what you are saying really works, create a chain or moss walk, save it in v15 then open it up in v13, when you select the chain stitch or moss you should see the height you selected in the height window on the property bar..

You can also try saving the file as .tbf and then open it up in the chenille editor and you will see there is no height assigned.

The engineers just need to rewrite the chenille and put the height selection back in. I am not sure why they took it out, I was beta testing for them when they started writing 14 and this was one of my complaints about the chenille feature back then. They kept telling me they were going to fix it. I just got aggravated and stopped testing. Now I use v14 all the time but I have to take it back to v13 for my chenille to work properly, I'm still aggravated.
Thanks for the help so far.
Saundra]]> Tue, 26 Apr 2016 21:49:02 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx
I looked into this and found the setting is called 'start command needle height'. In order to see this property setting in DG15 you need to go to 'view properties bar' and then select the segment and you will see the setting at the top right corner of the properties bar.

Thank you

Keri]]> Tue, 26 Apr 2016 20:50:18 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx
Thank you for bringing this to our attention. I will submit this to our developers.

Thank you

Keri
edited by pulse_keri on 4/19/2016]]> Mon, 18 Apr 2016 20:57:49 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx Mon, 18 Apr 2016 14:35:06 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx Hi Saundra,

I'm sorry for the delay in getting back to you. When you create a Moss Walk or Chain Walk segment you can adjust the stitch length but not the height. From what I see the properties for both segment types is the same in version 13 and version 15. However, if you create a chenille segment then yes you can adjust the height of each chenille segment.

Please let me know if you have any questions.

Thank you

Keri]]> Mon, 18 Apr 2016 14:34:14 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx
]]> Mon, 18 Apr 2016 13:35:09 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx
I'm sorry for the delay in getting back to you. When you create a Moss Walk or Chain Walk segment you can adjust the stitch length but not the height. From what I see the properties for both segment types is the same in version 13 and version 15. However, if you create a chenille segment then yes you can adjust the height of each chenille segment.

Please let me know if you have any questions.

Thank you

Keri]]> Fri, 15 Apr 2016 18:35:27 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx
I will investigate this and get back to you.

Thank you

Keri]]> Thu, 31 Mar 2016 16:38:43 GMT https://dgcommunity.pulsemicro.com/topic98-chenille-cco-and-tbf-files-for-machine.aspx Saundra, Works of Art Embroidery]]> Tue, 29 Mar 2016 15:45:21 GMT