Tajima DG by Pulse Community - DG15 Bug Reports - Prints does not match to real dimension of design. - Messages https://dgcommunity.pulsemicro.com/topic118-prints-does-not-match-to-real-dimension-of-design.aspx Tajima DG by Pulse Community - DG15 Bug Reports - Prints does not match to real dimension of design. - Messages en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Thu, 11 Aug 2016 07:04:46 GMT Thu, 11 Aug 2016 07:04:46 GMT https://dgcommunity.pulsemicro.com/topic118-prints-does-not-match-to-real-dimension-of-design.aspx Message from isilay 300mm X 300mm design . The design was divided on 4 pages. Here is the total size:

X axis: 198mm + 117,5mm = 315,50mm
Y axis: 280,5mm + 32,5mm = 313mm

If the design size exceeds one page, the print out pages are being printed bigger than their original values.
]]> Thu, 11 Aug 2016 07:04:46 GMT https://dgcommunity.pulsemicro.com/topic118-prints-does-not-match-to-real-dimension-of-design.aspx Message from Tomasz TMX As long as the embroidery is small (up to about 18 cm) print is correct.
Regards
Tomasz]]> Wed, 03 Aug 2016 13:14:27 GMT https://dgcommunity.pulsemicro.com/topic118-prints-does-not-match-to-real-dimension-of-design.aspx Message from isilay
DesignA is 100mm x 100mm in reality. On print paper 100mm X 100mm
DesignB is 180mm x 180mm in reality. On print paper 179,5mm x 180mm

This second printer showed better results than the first one.]]> Wed, 03 Aug 2016 07:57:34 GMT https://dgcommunity.pulsemicro.com/topic118-prints-does-not-match-to-real-dimension-of-design.aspx Message from isilay I tried it with 2 different size square designs on a Maestro 15.1.22.6249 with a printer HP Laserjet 1320. Here are the results:

DesignA is 100mm x 100mm in reality. On print paper 99,5mm X 100mm
DesignB is 180mm x 180mm in reality. On print paper 178,5mm x 180,5mm

These valus may also be related with the printers themselves. Do you have any other printer which you can test?]]> Tue, 02 Aug 2016 14:22:46 GMT https://dgcommunity.pulsemicro.com/topic118-prints-does-not-match-to-real-dimension-of-design.aspx Message from Tomasz TMX
Today, I found strange thing.
When I print design in 100% or actual size, draw on paper have not the same dimension.
When desing have 100mm on print is 2,5mm bigger.
When desing have 200mm on print is 5mm bigger.

I checked on 2 pulses,
Maestro- 15.1.31.6258
Maestro- 15.1.22.6249

Tomasz]]> Tue, 02 Aug 2016 11:10:09 GMT