Tomasz TMX

all messages by user

7/2/2016
Topic:
Preview Icon

Tomasz TMX
Tomasz TMX
Hi everyone.
Still they didn't fix this?
everyone has the same problem?
Regards TOM
7/2/2016
Topic:
Trim-Jumps

Tomasz TMX
Tomasz TMX
HI.
I have many programs with Trim-Jumps.
When I export them to floppy or DST file to USB stick, on the end design after cut
I found a few hits (normal stitches) Why previous version was different convert JUMPS, and now JUMPS reads like HIT? Is not have sens. Sometimes this problem is inside the design,but this is not regular.
Anyone of us was using Trim-Jumps for ending segments?
Regards TOM
7/2/2016
Topic:
Kind of Threads on Print sheet.

Tomasz TMX
Tomasz TMX
Hi.

Primary I use an Madeira Polyneon Threads in everyone thickness (40, 60, 75)
Sometimes in this same design, I put small letters and I use for them thinner thread but the same shade.
Why on print sheet there is not mark what type of them I used for?
Where from embroiderers on my production may know, which one is thinner, either in generally I use thinner one?
Regards TOM
edited by Tomasz TMX on 7/2/2016
7/20/2016
Topic:
Trim-Jumps

Tomasz TMX
Tomasz TMX
In DST file is NORMAL (hit) among jumps. Especially this is on end design.
In PXF file is this place is Trim-Jumps.
7/20/2016
Topic:
Preview Icon

Tomasz TMX
Tomasz TMX
Where we can find file with this update?
7/20/2016
Topic:
Kind of Threads on Print sheet.

Tomasz TMX
Tomasz TMX
Better was in previous version,
Enough count by digits in sequence,
and kind of palette threats , without icons.

In this way can fix on 1 sheet. was be clear and simple
7/21/2016
Topic:
The same value UNDERLAY - different denstity

Tomasz TMX
Tomasz TMX
Density is changing when I have alone or combine segments together.
I think that density should be the same as log as the value is the same.
Tomasz

edited by Tomasz TMX on 7/21/2016
edited by Tomasz TMX on 7/21/2016
7/26/2016
Topic:
Crash the program.

Tomasz TMX
Tomasz TMX
From time to time my Pulse are brooking down, and close application. Usually 3-5 times per day.
Yesterday I had bad luck, this time was crash while saving file and broke my file. upset
I lost a few hours my work.
Now I hasn't open it.

version 15.1.31.6258

Tomasz
7/27/2016
Topic:
Crash the program.

Tomasz TMX
Tomasz TMX
Usually it happen when I have selected segments and
click OPEN THE PROPERTIES DIALOG (Thunder icon)

Thank You
Tomasz
7/27/2016
Topic:
Purpose of Paste Function

Tomasz TMX
Tomasz TMX
Derya .
Please send picture icon of this function.

BR Tomasz
7/27/2016
Topic:
Trim-Jumps

Tomasz TMX
Tomasz TMX
New samples Trim+Jumps
7/27/2016
Topic:
Dimension column of text

Tomasz TMX
Tomasz TMX
HI.
I would have suggestions to increase the size of the column text, it would be more convenient.
Columns envelope and align are unnecessarily so large.
BR Tomasz
7/29/2016
Topic:
The same value UNDERLAY - different denstity

Tomasz TMX
Tomasz TMX
I think you misunderstood my attention.
No matter how many segments are connected.
Density underlay should be the same,as long as the value is the same.
Now If you combine to segments underlay has low stitches = low density. (see picture sample) and PXF
8/1/2016
Topic:
Purpose of Paste Function

Tomasz TMX
Tomasz TMX
I think this button is forgotten. Nothing happens, as I use it Big Grin
8/1/2016
Topic:
The same value UNDERLAY - different denstity

Tomasz TMX
Tomasz TMX
Hi isilay,
In my sample satin have above 1mm, even when you made satin 2mm problem is the same.
Tomasz
8/1/2016
Topic:
The same value UNDERLAY - different denstity

Tomasz TMX
Tomasz TMX
Such a situation should not have a place.
How I use TEXT a few letters have different densities and part of another.
(Is real problem . Now when i should have the same density I must convert Text to segments, then breakup...)
No matter if you have 1 mm wide satin or even 3 mm.
and this thickness range mostly used in lettering.

The situation is only underlay Parallel
edited by Tomasz TMX on 8/1/2016
8/2/2016
Topic:
Prints does not match to real dimension of design.

Tomasz TMX
Tomasz TMX
Hi

Today, I found strange thing.
When I print design in 100% or actual size, draw on paper have not the same dimension.
When desing have 100mm on print is 2,5mm bigger.
When desing have 200mm on print is 5mm bigger.

I checked on 2 pulses,
Maestro- 15.1.31.6258
Maestro- 15.1.22.6249

Tomasz
8/3/2016
Topic:
Prints does not match to real dimension of design.

Tomasz TMX
Tomasz TMX
The problem exists for printing 2 pages. when the project has a dimension who does not fit on one page. (Multiprint)
As long as the embroidery is small (up to about 18 cm) print is correct.
Regards
Tomasz
8/22/2016
Topic:
The same value UNDERLAY - different denstity

Tomasz TMX
Tomasz TMX
I found out that density is change when change type of sequence.
What relation is between type and density?
Shouldn't be the same in both?
9/8/2016
Topic:
Preview Icon

Tomasz TMX
Tomasz TMX
When will be ready update with fix this problem?
Tomasz
12




Powered by Jitbit Forum 8.3.7.0 © 2006-2013 Jitbit Software