isilay

all messages by user

4/7/2015
Topic:
saving file information

Işılay Işık
Işılay Işık
There isn't a direct feature in order to have pdf files. You can get the page as jpeg and then convert it to pdf by another application. If you have Composer, you can only use "File - Export - Image File" feature. If you have a higher level than Composer, you can also use "File - Export - Email Design". The second alternative will answer what you are looking for.
4/7/2015
Topic:
The Colour Changing Dress

Işılay Işık
Işılay Işık
Attention! Blurred images can split the offices..
4/7/2015
Topic:
Small Lettering, Big Impact!

Işılay Işık
Işılay Işık
Any other software's fonts cannot compete with those special small fonts of Pulse. Congratulations.
4/7/2015
Topic:
Which application look is yours?

Işılay Işık
Işılay Işık
There are several application look styles in Pulse. Which one is yours?
I like to change the look of my software, and I am glad Pulse offers it.
I used Visual Studio 2005 style for a long time, but nowadays my favourite is Office 2007-Black Style.
6/16/2015
Topic:
Unable to format disk in Creator 1401

Işılay Işık
Işılay Işık
Can it be because Floppy Disk Drive does not exist in your computer? I am using a notebook without an FDD, and I also see that "formatting" is not highlighted in my software either.
8/4/2015
Topic:
Loading Truetype fonts

Işılay Işık
Işılay Işık
You just need to add new TrueType fonts to your Windows. Pulse recognizes all TTF automaticly. Go to your computer's Control Panel - Fonts section and paste the TTF fonts in this folder.
8/24/2015
Topic:
saving file information

Işılay Işık
Işılay Işık
You can find it in here: Start Menu - All Programs - Accessories - Snipping Tool. Please check the following image for its location.

http://www.recesstec.com/wp-content/uploads/2012/09/SnippingTool.jpg
11/10/2015
Topic:
Saving a custom font

Işılay Işık
Işılay Işık
The fonts are normally saved in the hidden part of your pc. Did you do the search also in hidden folders? My Pulse fonts are located in this folder as default:

C:\ProgramData\Tajima\DGML By Pulse\Fonts

It can also be an issue related to the version of your software. Which version is your Pulse?
11/24/2015
Topic:
Trimming problems

Işılay Işık
Işılay Işık
It can be because of your embroidery machine's "Jump Convert" setting. Tajima's default value is 3J (3 jumps). If the machine setting is adjusted to a higher value, then the trims may not be performed.
12/21/2015
Topic:
View Only

Işılay Işık
Işılay Işık
You need to empty the checkbox which says "Open as read-only" in the File-Open dialog.
1/22/2016
Topic:
Tajima 15 Learning Curve

Işılay Işık
Işılay Işık
As an alternative to "Output to Disk" Tool, you can try using "File - Save as Copy". You can always see the DST file names (or other chosen file format) on your disk by this method.
2/3/2016
Topic:
Support for surface pen

Işılay Işık
Işılay Işık
Did you try to update the settings of your mouse? The extra buttons of the mouse must be assigned to DG15. If you don't change your mouse's default settings, those special buttons may not work.
2/3/2016
Topic:
Run Stitch Unreal

Işılay Işık
Işılay Işık
Congratulations! Thanks for sharing.
2/8/2016
Topic:
Probleme DG 15 et corelfusion

Işılay Işık
Işılay Işık
Derya Zer wrote:
Merhabalar, parca ayarlari penceresinin alt kısminda bulunan yapistir secenegi ne ise yarıyor acaba ? Teşekkürler, Keri.


Derya's question is: What is the function of the "PASTE" button located in the left bottom of Segment Settings dialog box?
2/16/2016
Topic:
DG15 Crashes on creation wave w/programmed fill

Işılay Işık
Işılay Işık
I have also witnessed the same problem (6249).
2/17/2016
Topic:
DG15 Crashes on creation wave w/programmed fill

Işılay Işık
Işılay Işık
I have also tried Keri's suggestion, it crashed.
4/18/2016
Topic:
CHENILLE CCO AND TBF FILES FOR MACHINE

Işılay Işık
Işılay Işık
Saundra has a point with this request. Pulse did have height setting for both "Chain Walk" and "Moss Walk" tools in Version 2009 and before. You can see it on below attached screenshot (13.1.5.4190) :

4/20/2016
Topic:
Windows 10 problem

Işılay Işık
Işılay Işık
Sorry Rui, it will not help you but I want to add a similar issue.



“Program cannot start because MSVCR120.dll is missing on your computer. Reinstall the software in order to solve the problem.”

My friend had this error when he wanted to try Windows 10 & DG15. The dll was different than yours, but the issue was very similar. Reinstalling Pulse did not help. He didn't want to use Windows 10 Home for some other reasons and made a fresh Windows 7 Pro installation.
6/14/2016
Topic:
Spiral Fill

Işılay Işık
Işılay Işık
1- Draw a shape with Pen/Rectangle/Ellipse tools or import an artwork.
2- Select this artwork segment and right click with your mouse.
3- Save it as spiral fill shape.
4- Give a name for your shape and click ok.
7/9/2016
Topic:
Kind of Threads on Print sheet.

Işılay Işık
Işılay Işık
Your solution is to get the print sheet without "SIMPLIFY" option. When you simplify the threads, you can just see the code number of the thread. If you uncheck the simplify box, you will be able to see the details of the thread (including the thread's full name). You may see it on below images.

12




Powered by Jitbit Forum 8.3.7.0 © 2006-2013 Jitbit Software